Measuring for Window Treatments

Exact measurements of windows and window coverings are necessary for a successful installation, and although this may seem easy, it can be a little tricky.

Different window covering products require different measurements, and each type of window treatment has its own installation method. If they are installed incorrectly they will not operate properly. Small measuring errors can result in the window treatments not operating properly; unwanted light shining through on the sides, top, or bottom; or the treatments not fitting the window casing at all – delaying the entire process and costing more in time and money.

We suggest that you have your windows measured by a professional like those at America’s Floor Source.

Since no two windows are seldom exactly the same size, each and every window must be carefully measured, and specialty or oddly shaped windows require a template to be created to ensure accurate measurements and construction.

The depth of the window casing and the chosen window treatment determines whether or not a window treatment can be installed with an inside mount. Mounting bracket sizes vary so this must be checked accurately.

An outside mounted window covering should be considered if you would like the window covering to completely clear the window when open, allowing for more light or better view. This type of installation is often desirable on patio doors.

For an inside mount, the installer will first check to make sure the inside top of the window casing is level. If necessary, the installer will level the headrail using shims.

An inside mounted window treatment houses the window covering inside the window casing. An outside mounted window treatment fits around or outside the window casing.

With an inside/outside mount, the mounting bracket and headrail are installed inside the window casing, but they are not fully recessed. Thus, a portion of the headrail will not be completely flush with the face of the window.

The last part to be installed during most window treatment installations is the valance, assuming one is required.

If you'd like to learn more about installing window treatments or are interested in having measurements done, contact an America's Floor Source representative today or visit one of our Columbus showrooms.